Home - People - Faculty

Faculty

Name: Jie DONG

Title: Associate Professor

Office: Room. 209, Material Building B

Tel: +86-21-3420-3052

Fax: +86-21-3420-2794

Email: jiedong@sjtu.edu.cn

URL:http://laf.sjtu.edu.cn

Platform: Light Alloy Net Forming National Engineering Research Center

Introduction

Research Interests
High-performance light alloy materials, precise plastic forming and numerical simulation.
  

Biographical Information

 Associate Prof. Materials forming, Shanghai Jiao Tong University, 2008-present
 Visiting Scholar Research Center of Dresden Rossendorf, Germany,2006-2007
 Post-doc Materials forming, Shanghai Jiao Tong University, 2004-2006
 Ph.D. Materials forming, Northeastern University, 1993-1998
 M.S. Materials forming, Northeastern University, 1998-2001
 B.S. Materials forming, Northeastern University, 1993-1998

Research Interests

High-performance light alloy materials, precise plastic forming and numerical simulation.

 

Selected Publications

 (1) Fenghua Wang,Jie Dong,Yanyao Jiang,Wenjiang Ding,Cyclic deformation and fatigue of extruded Mg–Gd–Y magnesium alloy,Materials Science and Engineering A 561(1), pp 403-410, 2013
 (2) Fenghua Wang, Jie Dong, MiaolinFeng, XingweiZheng, Wenjiang Ding. Application of Drucker–Prager plasticity to predict fracture in rectangular cup drawing of AZ31 alloy sheet, Materials Science and Engineering A. 532 pp 316-324 , 2012
 (3) XingweiZheng,Jie Dong, Na Zhou, Penghuai Fu, Shoushan Yao, Wenjian Ding. Effect of process parameters on structure and macrosegregation upon direct-chill casting of a Mg-Nd-Zn-Zr alloy. Materials Science and Technology. 27, pp275-281, 2011
 (4) XingweiZheng,Jie Dong,Wencai Liu, Fenghua Wang, Li Jin, Wenjian Ding. Forgeability and die-froging forming of direct chilling cast Mg-Nd-Zn-Zr magnesium alloy. Materials Science and Engineering. A, 527, pp3690-3694, 2010
 (5) Dong, J.,Liu, W. C.,Song, X.,Zhang, P.,Ding, W. J.,Influence of heat treatment on fatigue behaviour of high-strength Mg-10Gd-3Y alloy,Materials Science and Engineering A, 527(21-22), pp 6053-6063, 2010
 (6) L. Jin,J. Dong, R. Wang, L.M. Peng, Effects of hot rolling processing on microstructures and mechanical properties of Mg–3%Al–1%Zn alloy sheet. Materials Science and Engineering A 527, pp1970-1974,2010
 (7) DONG Jie, CUI Jianzhong, DING Wenjiang. Theoretical discussion of the effect of a low-frequency electromagnetic vibrating field on the as-cast microstructures of DC Al-Zn-Mg-Cu-Zr ingots.Journal of crystal growth.2006, 295:179-187
 (8) DONG Jie, CUI Jianzhong. A new way to cast new high alloy Al-Zn-Mg-Cu-Zr alloy for super high strength and toughness.Journal of Materials Processing Technology. 2006, 171: 399-404
 (9) DONG Jie, CUI Jianzhong, BAN Chunyan, LIU Xiaotao.Effect of Low Frequency Electromagnetic Casting on the Castability, Microstructure, and tensile properties of DC cast Al-Zn-Mg-Cu Alloy. Metallurgical and Materials Transactions A, 2004, 35A: 2487-2494
 (10) J Dong, J Z Cui, Q C Le, G M Lu. Liquidus Semi-continuous Casting, reheating and thixoforming of a wrought aluminum alloy 7075. Materials Science & Engineering A. 2003, A345: 234-242
 

Research Projects

 (1)  National Key Technology R&D Program of the Ministry of Science and Technology, Sub-project, “Integrated demonstration application of high-performance Mg alloy parts in new energy vehicle”, PI, 940,000RMB, 2011.1-2013.12
 (2)  “863” Program of the Ministry of Science and Technology, “Development of high formability of magnesium alloy for car inner door”, PI, 970,000RMB, 2009.1-2011.12
 (3)  “973” Program of the Ministry of Science and Technology, Sub-project, “Plastic deformation behaviors of magnesium alloy in deep drawing process”, PI, 430,000RMB, 2009.1-2011.12
 (4)  “973” Program of the General Armament Department, Sub-project, “×××××××”, PI, 1,000,000RMB, 2009.1-2011.12
 (5)  National Natural Science Foundation, Surface deformation characteristics and anti-fatigue mechanism of warm shot peening magnesium alloy. PI, 200,000RMB, 2009.1-2012.12
 (6)  Shanghai Science and Technology Committee, RE magnesium alloy under cyclic loading and fatigue life of deformation behavior, PI, RMB 200,000, 2012.09-2014.08
 (7)  General Motors Corporation, “Process Development of Magnesium Alloy Engine Cylinder Blocks”, PI, USD420,000, 2009.1-2011.12
 (8)  KONE Elevators Co., Ltd. Development of high strength Al-Si alloys for high pressure die casting escalator step, PI, USD60,000, 2013.3-2014.4
 (9)  Nantong Hengxiu Aluminum Heat Transfer Material Co., Ltd. Development of high performance heat transfer Al alloys, PI, RMB 4,000,000, 2013.5-2017.4
 (10) China Airborne Missile Academy, “×××××××”, PI, 2,900,000RMB, 2009.10-2012.12

Honors & Awards

 (1)  Shanghai rising-star of science and technology, 2012 
 (2)  Shanghai rising-Star of Science and Technology, 2009 
 (3)  Awards of National Defense Science and Technology. Rank 2,No.8, 2006 
 (4)  Awards of Shanghai Science and Technology. Rank 1,No.9, 2007 
 (5)  Awards of National Science and Technology. Rank 2,No.5, 2010 
 (6)  Awards of Shanghai Science and Technology. Rank 1,No.8, 2010

 
 
 


800 Dongchuan Road, Minhang District, Shanghai, China Tel: +86-21-3420-3098