Home - People - Faculty

Faculty

Name: Ke CHEN

Title: Associate Professor

Office: Room 407, Material Building A

Tel: +86-21-5474-8974

Fax: +86-21-5474-8974

Email: chenke83@sjtu.edu.cn

URL:

Platform: Institute of High Performance Metal Materials

Introduction

Ke Chen received his Ph.D. degree in Materials Science and Engineering from The Ohio State University in 2009. His undergraduate education was received at Hefei University of Technology...

 

Biographical Information

Ke Chen received his Ph.D. degree in Materials Science and Engineering from The Ohio State University in 2009. His undergraduate education was received at Hefei University of Technology, in Hefei, Anhui Province, China in 2005. From October to December in 2009, he was with Research and Development Division of Hitachi America, Ltd., Farmington Hills, Michigan. Since January 2010, he has been with Shanghai Jiao Tong University, where he is currently Associate Professor of the School of Materials Science and Engineering. He is now serving as a Key Reader in the Board of Review of Metallurgical and Materials Transactions, and also serving as a member in the Electron Backscatter Diffraction Committee, Chinese Electron Microscopy Society.

 

Research Interests

 1. Friction stir welding/processing (FSW/P)
 Current research involves the development of friction stir welding of dissimilar materials, in situ composite synthesis via friction stir processing for increased strength and thermal stability
 2.Microstructural control of wrought Ni-based superalloys

Selected Publications

 1.  K. Chen*, J. Wu, H. Shi, X. Chen, Z. Shen, M. Zhang, L. Zhang, A. Shan: “Transition of deformation behavior and its related microstructure evolution in Nimonic 80A under hot-  to-warm working”, Materials Characterization, 2015, vol. 106, pp. 175-184.
 2.  B. Chen, K. Chen*, W. Hao, Z. Liang, J. Yao, L. Zhang and A. Shan: "Friction stir welding of small-dimension Al3003 and pure Cu pipes", Journal of Materials Processing Technology, 2015, vol. 223, pp. 48-57.
 3.  Z. Liang, X. Wang, K. Chen*, J. Yao, Q. Yang, L. Zhang, A. Shan: “Effect of Tool Offset and Tool Rotational Speed on Enhancing Mechanical Property of Al/Mg Dissimilar FSW Joints”, Metallurgical and Materials Transactions A, 2013, vol. 44, pp. 3721-31.
 4.  X. Chen, H. Shen, K. Chen*,J. Wu, L. Zhang, A. Shan: “Grain Structure Control during Hot Deformation of Nimonic 80A”, Journal of Iron and Steel Research, 2011, vol. 23 (Supplement 2), pp. 298-301.
 5.  J. Wu, K. Chen*, X. Chen, S. Tian, Z. Shen, L. Zhang, A. Shan: “Application of EBSD in the study of dynamic recrystallization mechanisms in Nimonic 80A”, Journal of Chinese Electron Microscopy Society, 2011, vol. 30, pp. 356-359.
 6.  K. Chen, W. Gan, K. Okamoto, K. Chung, R. H. Wagoner: “Mechanism of Grain Coarsening in Friction-Stir Welded AA5083 after Heat Treatment”, Metallurgical and Materials Transactions A, 2011, vol. 42, pp. 488-507.
 7.  Q. Yang, X. Li, K. Chen, Y.J. Shi: “Effect of tool geometry and process condition on static strength of a magnesium friction stir lap linear weld”, Mater. Sci. Eng., A, 2011, vol. 528, pp. 2463-78.
 8.  H. Cui, F. Sun, K. Chen, L. Zhang, R. Wan, A. Shan, J. Wu: "Precipitation behavior of Laves phase in 10%Cr steel X12CrMoWVNbN10-1-1 during short-term creep exposure", Mater. Sci. Eng., A, 2010, vol. 527, pp. 7505-09.

Research Projects

 1.“A modified FSW technique and its mechanism for enhancing grain structure stability in weld nugget” Supported by National Natural Science Foundation of China (Grant No. 51204108)
 2.“Microstructure control of Nimonic 80A during hot-to-warm deformation” Supported by Shanghai Committee of Science and Technology (Grant No. 11ZR1418100)
 3.“Control of abnormal grain growth in the stir zone via in situ nano-particle formation during FSW/P” Supported by Scientific Research Foundation for the Returned Overseas Chinese Scholars, State Education Ministry
 4.“Friction stir welding of Al/Cu dissimilar pipes” Daikin Industries Ltd.
 5.“Microstructure and mechanical properties of AA2195/AA2219 dissimilar FSW” Supported by Shanghai Aerospace Equipment Manufacturer

Honors & Awards

 1.       20132nd Price, Teaching in English Competition, Shanghai Jiao Tong University
 2.       2011SMC-Morningstar Young Scholar Award, Shanghai Jiao Tong University
 3.       2011TheBestPosterPaper AwardSecondPlace in the 8th International Workshop on Intermetallic and Advanced Materials


800 Dongchuan Road, Minhang District, Shanghai, China Tel: +86-21-3420-3098