Home - People - Faculty


Name: Qudong WANG

Title: Professor

Office: Room 207, Material Building B

Tel: +86-21-5474-2715

Fax: +86-21-5474-2715

Email: wangqudong@sjtu.edu.cn


Platform: Light Alloy Net Forming National Engineering Research Center


Biographical Information

 B.S. in Materials Engineering (July 1985)
 Department of Mechanical Engineering, Chongqing University
 M.E. in Material Engineering (June, 1988)
 Department of Materials Engineering, Dalian University of Technology
 Lecturer(1991-), Sichuan Institute of Technology(1988-1992)
 Ph.D in Material Engineering (August, 1995)
 Department of Materials Engineering, Dalian University of Technology
 Postdoctor(1995.9-1997.8), Associate Professor(1997.5-), Enhanced Laboratory of Ferrometallurgy of Shanghai, Shanghai University(1995-1997)
 Associate Professor(1997.9-), Professor(2002.8-),School of Materials Science and Engineering/National Engineering Research Center of Light Alloy Net Forming, Shanghai Jiaotong University(1997-present)
 Guest researcher(2000.4-2001.3)
 National Industrial Research Institute of Nagoya, AIST, Japan
 Visiting scientist(2002.8-11)
 GPM2 Laboratory at INPG, French

Research Interests

Teaching Involvements

Magnesium alloys and their forming technology
Casting Alloys and Process Control
Crystalization Principle

Selected Publications

1.Qudong Wang, Yongjun Chen, Manping Liu, Jinbao Lin, Hans J. Roven. Microstructure evolution of AZ series magnesium alloys during cyclic extrusion compression. Materials Science and Engineering A, 2010, 527(9): 2265-2273
2.Yan Gao, Qudong Wang, Jinhai Gu, Yang Zhao, Yan Tong, Dongdi Yin. Comparison of microstructure in Mg-10Y-5Gd-0.5Zr and Mg-10Y-5Gd-2Zn-0.5Zr alloys by conventional casting. Journal of Alloys and Compounds, 2009,477(1-2): 374-378
3.T. Peng, Q. D. Wang, J. B. Lin. Microstructure and mechanical properties of Mg-10Gd-2Y-0.5Zr alloy recycled by cyclic extrusion compression. Materials Science and Engineering A, 2009, 516:23-30
4.Qudong Wang, Daquan Li, J.J. Blandin, M. Suéry, P. Donnadieu, Wenjiang Ding. Microstructure and creep behavior of extruded Mg-4Y-4Sm-0.5Zr alloy. Materials Science and Engineering A. 2009, 516:189-192
5.C. J. Chen, Q. D. Wang, D. D. Yin. Thermal Properties of Mg-11Y-5Gd-2Zn-0.5Zr (wt.%) Alloy. Journal of Alloys and Compounds, 2009, 487(1-2): 560-563
6.Wang Qudong,Chen Wenzhou, Ding Wenjiang,Zhu Yanping M. Mabuchi. Effect of Sb on the Structure and Properties of AZ91 Magnesium Alloy. Metall. & Mater. Trans., 2001,32A(3):787-794
7.Wang Qudong, Zeng Xiaoqin, Lu Yizhen, Ding Wenjiang, Zhu Yanping,Li Qinghua,Lan Jie.Study on the Fluidity of AZ91+xRE Magnesium Alloy.Mater. Sci. & Eng.A,1999, 271(1-2):109-115
8.Wang Qudong, Ding Wenjiang, Jin Junze.The step growth of primary silicon observed by decantation during centrifugal casting. Mater. Sci. & Techn. 1999,15(8): 921-925
9.Wang Qudong, Chen Wenzhou, Zeng Xiaoqin,Lu Yizhen,Ding Wenjiang, Zhu Yanping, Xu Xiaoping, M. Mabuchi. Effects of Ca addition on the microstructure and mechanical properties of AZ91 magnesium alloy. J. Mater. Sci., 2001,36(12): 3035-3040
10.Wang Qudong, Wei Yinhong, Chen Wenzhou, Zhu Yanping, Ma Chunjiang, Ding Wenjiang. In situ surface composites of (Mg2Si+Si)/ZA27 fabricated by centrifugal casting. Materials Letters,2003,57: 3851-385


Research Projects

Honors & Awards

800 Dongchuan Road, Minhang District, Shanghai, China Tel: +86-21-3420-3098