Introduction
Professor Jun Chen received his bachelor degree and master degree from Shandong Polytechnic University, China in 1990 and 1993 respectively, and got his Ph.D. degree from Shanghai Jiao Tong University (SJTU) in 1996...
Biographical Information
Professor Jun Chen received his bachelor degree and master degree from Shandong Polytechnic University, China in 1990 and 1993 respectively, and got his Ph.D. degree from Shanghai Jiao Tong University (SJTU) in 1996 in China. During April 1998 to April 1999, he was the visiting scholar at the University of Michigan-Dearborn and Ford Motor Company, USA. He has been full professor at SJTU since Sept 2004.
Currently Prof. Jun CHEN is the deputy director of the Institute of Forming Technology and Equipment, School of Material Science and Engineering, SJTU, deputy director of the National Engineering Research Center for Die & Mold CAD at SJTU, member of the academic committee of the State Key Laboratory of Material Processing Numerical Simulation and Die & Mold Technology at Huazhong University of Science & Technology, China, standing director of the Society for Plasticity of Technology, China, head of the technical committee of Shanghai Die & Mold Trade Association and editorial member for Journal of Shanghai Jiao Tong University, Journal of Plasticity Engineering, Forging & Stamping and Precision Forming Engineering.
Research Interests
New material stamping and incremental sheet forming
Constitutive modeling and numerical simulation of forming process
Intelligent design and design optimization.
Selected Publications
[1] Yuzhong Xiao, Jun Chen*, Jian Cao, A generalized thermodynamic approach for modeling nonlinear hardening behaviors, International Journal of Plasticity, 38, 102–122, 2012
[2] Yuzhong Xiao, Jun Chen*, Xinhai Zhu, Jian Cao, Modified maximum mechanical dissipation principle for rate-independent metal plasticity, ASME Journal of Applied Mechanics，published online: http://dx.doi.org/10.1115 /1.4023685, 2013
[3] Dongkai Xu, Jun Chen*, Yucheng Tang, Jian Cao. Topology optimization of die weight reduction for high-strength sheet metal stamping International Journal of Mechanical Sciences, published online, http://dx.doi.org/ 10.1016 /j.ijmecsci.2012.03.006, 2012
[4] Jun Chen*, Dongkai Xu, Guodong Xia, Xifeng Li, Jieshi Chen, Jian Zhang, Wei Yan, Yue Li. Geometric compensation for automotive stamping die design integrating structure deflection and blank thinning, International Journal of Advanced Manufacturing Technology, published online: DOI 10.1007/ s00170-012-4422-7, 2012
[5] Feifei Zhang, Jun Chen*, Jieshi Chen, Jian Lu, Gang Liu, Shijian Yuan, Overview on constitutive modeling for hydroforming with the existence of through-thickness normal stress, Journal of Materials Processing Technology, 212, 2228-2237, 2012
[6] Yonghui Liu, Jun Chen*, Song Yu, Congxin Li. Numerical simulation of three-dimensional bulk forming processes by the element-free Galerkin method, International Journal of Advanced Manufacturing Technology, 2008, 36(5-6): 442-450
[7] Yucheng Tang, Xionghui Zhou, Jun Chen*. Preform tool shape optimization and redesign based on neural network response surface methodology, Finite Elements in Analysis and Design, 2008, 44(8): 462-471
[8] Yajun Jiang, Jun Chen*, Xueyu Ruan. Fuzzy similarity-based rough set method for case-based reasoning and its application in tool selection. International Journal of Machine Tools and Manufacture,2006,46(2): 107-113
[9] Jinyan Wang, Jun Chen, Minghui Li. URI 4-node quadrilateral element by assumed strain method for nonlinear problems. Acta Mechanica Sinica, 2004,20(16): 632-641
[10] Xiaoxiang Shi, Jun Chen, Yinghong Peng, Xueyu Ruan. A new approach of die shape optimization for sheet metal forming processes. Journal of Materials Processing Technology,2004,152 (1): 35-42